ShopDreamUp AI ArtDreamUp
Deviation Actions
Suggested Deviants
Suggested Collections
You Might Like…
Description
Here's a tutorial of how I do flexible dragonwings:
1. Scetch a whing in a streched-out position. Use toothpics or something else and cut them into size for the different bones.
2. Connect the sticks with wire. It does not have to look beautiful, the wire just has to hold the wooden sticks together.
3. lay it flat on a plastic surface. Now take a sheet of soft paper, a tishue for example, and glue it from front and back to the sceletton.
4. After the glue is dry, trim the edges of the wing.
5. Now you can bend the wings as you like them.
This way I did these figures:
[link] / [link] / [link]
Have fun
1. Scetch a whing in a streched-out position. Use toothpics or something else and cut them into size for the different bones.
2. Connect the sticks with wire. It does not have to look beautiful, the wire just has to hold the wooden sticks together.
3. lay it flat on a plastic surface. Now take a sheet of soft paper, a tishue for example, and glue it from front and back to the sceletton.
4. After the glue is dry, trim the edges of the wing.
5. Now you can bend the wings as you like them.
This way I did these figures:
[link] / [link] / [link]
Have fun
Image size
560x1884px 909.51 KB
Make
Canon
Model
Canon PowerShot A570 IS
Shutter Speed
1/60 second
Aperture
F/4.5
Focal Length
16 mm
ISO Speed
200
Date Taken
Nov 11, 2007, 3:18:46 PM
Sensor Size
1mm
© 2011 - 2024 luthien368
Comments9
Join the community to add your comment. Already a deviant? Log In
this could be adapted int fins for seadweller costumes